No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Data Plan

Data Plan

Before the configuration, plan data according to Table 18-1. The data in Table 18-1 is used for reference only.

Table 18-1  Data plan for interconnection between the RouterA and RouterB

RouterA Public Network Address

RouterA Tunnel Interface Address

RouterA Private Network Address

RouterB Public Network Address

RouterB Tunnel Interface Address

RouterB Private Network Address

Parameters for IPSec Phase 1 (IKE Negotiation Phase)

IKE version: v1

Negotiation mode: main

Authentication method: pre-shared key

Pre-shared key: huawei@123

Encryption algorithm: aes-cbc-128

Authentication algorithm: sha1

DH group: group5

DPD detection: enabled

Parameters for IPSec Phase 2 (IPSec Negotiation Phase)

Security protocol: ESP

Encapsulation mode: tunnel

Encryption algorithm: aes-128

Authentication algorithm: sha1

Lifetime: 3600s (default value)

PFS: disabled

Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 22746

Downloads: 450

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next