No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Networking Requirements

Networking Requirements

As shown in Figure 1, the enterprise branch and headquarters are connected through a transmission network. E1 links are provided on the transmission network to connect to the branches, and optical fibers and optical transceivers are used to connect to the enterprise network. To be specific, RouterA is the gateway of the enterprise branch and is connected to optical transceiver 1 through an E1 leased line. RouterB is the gateway of the headquarters and is connected to optical transceiver 2 through an E1 leased line. The optical transceivers are then connected to the transmission network using optical fibers.

The customer can select appropriate E1 interface cards and E1 cables based on the device requirements and network environment. This example uses two-port 2E1/T1-M interface cards that work in E1 mode. 2E1/T1-M interface cards work with DB9 connectors, while optical transceivers work with RJ45 connectors. 120-ohm DB9-to-RJ45 cables can be used to connect 2E1/T1-M interface cards with optical transceivers, which are then connected to the transmission network, enabling data transmission between the branch and the headquarters.

Figure 15-2  Networking for configuring two routers to communicate through optical transceivers
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 19999

Downloads: 432

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next