No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Notes

Configuration Notes

  • The E1 physical interface of the AR is DB9, whereas the E1 physical interface of the Cisco 2900 is RJ45. When they are connected, the conversion adapter or DB9-to-RJ45 cable is required.
    Other cable interfaces may connect to the E1 interface of the AR, so the protocol converter may be required for protocol conversion. You need to select the cable connector and conversion adapter as needed. For details about E1/T1 cables supported by the device, see E1/T1 Cable in the Huawei AR Series Access Routers Get to Know the Product - Hardware Description - Cables.
  • The voice functions are controlled by the license. By default, voice functions are disabled on a newly purchased device. To use the voice functions, apply for and purchase the license from Huawei local office.
  • Table 11-1 lists the matching product models and versions.
    Table 11-1  Matching product models and versions





    AR161FV-1P, AR1220V, AR1220VW, AR1220EV, AR1220EVW, AR2200 series (excluding the AR2201 and AR2202), and AR3200 series

    • The AR220X and AR2220L must be equipped with the hardware that supports voice communication.
    • The AR2200 and AR3200 need to be equipped with the DSP module.



    Cisco 2900

    Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M1, RELEASE SOFTWARE (fc1)

Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 27865

Downloads: 505

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next