No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Notes

Configuration Notes

  • When an AR is connected to a DSLAM of a different vendor (Selta, Alcatel, or Siemens for example) through the primary link (ADSL, VDSL, or G.SHDSL link), ensure that parameter settings on both ends are consistent because DSLAMs of different vendors use different chips and inconsistent default parameters. This ensures successful interconnection between the AR and DSLAM.
  • Table 16-1 lists the matching product models and versions.
    Table 16-1  Matching product models and versions





    AR1200&AR2200&AR3200&AR3600 series routers (installed with 4G.SHDSL cards)

    V200R002C00SPC100 and later




Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 23077

Downloads: 451

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next