No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RouterA

Configuring RouterA

Configuration Roadmap

The configuration roadmap is as follows:
  1. Configure the working mode of the interface card, and signaling mode and clock source of the VE1 interface.
  2. Configure RouterA to work in PBX mode.
  3. Configure an interface address and address pools.
  4. Configure the SIP server.
  5. Configure a voice user.
  6. Configure call-in and call-out rights.
  7. Configure a call route and a PRA trunk group.
  8. Configure intra-office and inter-office call prefixes.

Procedure

  1. Configure the working mode of the interface card, and signaling mode and clock source of the VE1 interface.

    # Configure the interface card as an E1 voice card.

    <Huawei> system-view
    [Huawei]  sysname RouterA
    [HuaweiA] set workmode slot 1 elt1 e1-voice
    Changing the working mode will reset the board in slot 1. Continue? [y/n]:y
    INFO: Resetting board[1] succeeded.
    

    # Enter the VE1 interface view and set the signaling mode to CCS.

    [HuaweiA] voice
    [HuaweiA-voice] port ve1 1/0/0
    [HuaweiA-voice-ve1-1/0/0] signal ccs
      Set signal type successfully
    [HuaweiA-voice-ve1-1/0/0] quit
    [HuaweiA-voice] quit
    

    # Configure the clock source.

    [HuaweiA] clock source 0 1/0/0 priority 5
    

  2. (Optional) Configure RouterA to work in PBX mode.

    NOTE:

    By default, the device works in PBX mode. This step is optional.

    [HuaweiA] voice
    [HuaweiA-voice] service-mode pbx
    [HuaweiA-voice] return
    [HuaweiA] save
    The current configuration will be written to the device.                      
      Are you sure to continue? (y/n)[n]:yIt will take several minutes to save configuration file, please wait..........
      Configuration file had been saved successfully                                
      Note: The configuration file will take effect after being activated  
    <HuaweiA> reboot
    Info: The system is comparing the configuration, please wait.                   
    System will reboot! Continue ? [y/n]:yInfo: system is rebooting, please wait...
    

  3. Configure an interface address and address pools.

    <HuaweiA> system-view
    [HuaweiA] interface gigabitethernet 0/0/0
    [HuaweiA-GigabitEthernet0/0/0] ip address 10.1.1.1 24
    [HuaweiA-GigabitEthernet0/0/0] quit
    [HuaweiA] voice
    [HuaweiA-voice] voip-address media interface gigabitethernet 0/0/0 10.1.1.1
    [HuaweiA-voice] voip-address signalling interface gigabitethernet 0/0/0 10.1.1.1
    

  4. Configure a SIP server.

    [HuaweiA-voice] sipserver
    [HuaweiA-voice-sipserver] signalling-address ip 10.1.1.1 port 5060
    [HuaweiA-voice-sipserver] media-ip 10.1.1.1
    [HuaweiA-voice-sipserver] register-uri abcd.com
    [HuaweiA-voice-sipserver] home-domain abcd.com
    [HuaweiA-voice-sipserver] reset
    [HuaweiA-voice-sipserver] quit
    

  5. Configure a SIP user with number 86060.

    [HuaweiA-voice] pbxuser 86060 sipue
    [HuaweiA-voice-pbxuser-86060] sipue 86060
    [HuaweiA-voice-pbxuser-86060] telno 86060
    

  6. Configure call-in and call-out rights.

    NOTE:

    By default, call-in rights include intra-office, local, national toll, and international toll calls and call-out rights are intra-office and local calls.

    # Configure call-in rights as intra-office, local, national toll, and international toll calls and call-out rights as intra-office, local, and national toll calls.

    [HuaweiA-voice-pbxuser-86060] call-right in all
    [HuaweiA-voice-pbxuser-86060] call-right out inter enable local enable ddd enable
    [HuaweiA-voice-pbxuser-86060] quit
    

  7. Configure a call route and a PRA trunk group.

    # Configure the call route pra.

    [HuaweiA-voice] callroute pra
    [HuaweiA-voice-callroute-pra] quit
    

    # Create and configure the trunk group pra.

    [HuaweiA-voice] trunk-group pra dss1-net
    [HuaweiA-voice-trunkgroup-pra] callroute pra
    [HuaweiA-voice-trunkgroup-pra] trunk-pra 1/0/0
    [HuaweiA-voice-trunkgroup-pra] reset
    Are you sure to continue?[Y/N]:y
     Note: Trunkgroup reset succeeds.
    [HuaweiA-voice-trunkgroup-pra] quit
    

  8. Configure intra-office and inter-office call prefixes.

    # Configure an intra-office prefix. Create a call prefix profile 86, set the call prefix to 86, specify the basic service, configure the intra-office call, and set the maximum and minimum lengths of a number that can be parsed to 32 and 2 respectively.

    [HuaweiA-voice] callprefix 86
    [HuaweiA-voice-callprefix-86] prefix 86
    [HuaweiA-voice-callprefix-86] call-type category basic-service attribute 0
    [HuaweiA-voice-callprefix-86] digit-length 2 32
    [HuaweiA-voice-callprefix-86] quit
    

    # Configure an inter-office call prefix. Create a call prefix profile 61, set the call prefix to 61, specify the basic service, configure the local call, set the maximum and minimum lengths of a number that can be parsed to 32 and 2 respectively, and bind the call prefix profile to the call route.

    [HuaweiA-voice] callprefix 61
    [HuaweiA-voice-callprefix-61] prefix 61
    [HuaweiA-voice-callprefix-61] call-type category basic-service attribute 1
    [HuaweiA-voice-callprefix-61] digit-length 2 32
    [HuaweiA-voice-callprefix-61] callroute pra
    [HuaweiA-voice-callprefix-61] quit
    

  9. Save the configuration.

    [HuaweiA-voice] save
    

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 27987

Downloads: 505

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next