No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


  1. Run the display interface ethernet 1/0/0 command on the Router. The command output shows that the G.SHDSL interface status is Up.
    <Router> display interface ethernet 1/0/0
    Ethernet1/0/0 current state : UP                                                
    Line protocol current state : UP
  2. Run the show interface port shdsl-line:1/1/19/2 command on the DSLAM. The command output shows that the interface status is active.
  3. The enterprise branch can ping the headquarters successfully through the G.SHDSL link.
Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 20504

Downloads: 436

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next