No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


  1. Run the display voice trunk-group sip trunk-circuit state brief command. You can see that the link status of the SIP trunk on the AR is Idle.
    <Huawei> system-view
    [Huawei] voice
    [Huawei-voice] display voice trunk-group sip trunk-circuit state brief
    KC under trunk group state: sip
     TKC No  State
     2412    Idle
     2413    Idle
     2414    Idle
     2415    Idle
     2416    Idle
     2417    Idle
     2418    Idle
     2419    Idle
     2420    Idle
     2421    Idle
     2422    Idle
     2423    Idle
     2424    Idle
     2425    Idle
     2426    Idle
     2427    Idle
     2428    Idle
     2429    Idle
     2430    Idle
     2431    Idle
     2432    Idle
     2433    Idle
     2434    Idle
     2435    Idle
     2436    Idle
     2437    Idle
     2438    Idle
     2439    Idle
     2440    Idle
     2441    Idle
  2. Check communication information on the Cisco 2900.
    Router# show voice call status
    CallID     CID  ccVdb      Port        Slot/DSP:Ch  Called #   Codec    MLPP Dial-peers
    0x356D     7BC  0x29798E68 0/0/0            0/1:1  *6101       g711alaw  62/6101
    1 active call found
    Router# show voice call summary
    PORT           CODEC     VAD VTSP STATE            VPM STATE
    ============== ========= === ==================== ======================
    0/0/0         g711alaw   y  S_CONNECT             FXSLS_CONNECT            
    0/0/1         -          -  -                     FXSLS_ONHOOK             
    0/0/2         -          -  -                     FXSLS_ONHOOK             
    0/0/3         -          -  -                     FXSLS_ONHOOK             
  3. User 6101 can call user 6201 and the communication is normal.
Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 20910

Downloads: 440

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next