No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verification

Verification

1. Check the OSPF status of RouterA.

[RouterA]display ospf peer brief                                                
                                                                                
         OSPF Process 1 with Router ID 10.1.1.1                                 
                  Peer Statistic Information                                    
 ----------------------------------------------------------------------------   
 Area Id          Interface                        Neighbor id      State       
 0.0.0.0          GigabitEthernet4/0/0             14.1.1.10        Full        
 0.0.0.0          GigabitEthernet0/0/0             10.1.1.2         Full        
 ----------------------------------------------------------------------------   
 Total Peer(s):     2                                                           
[RouterA]

2. Check the routes of RouterA.

[RouterA]display ip routing-table                                               
Route Flags: R - relay, D - download to fib                                     
------------------------------------------------------------------------------  
Routing Tables: Public                                                          
         Destinations : 14       Routes : 14                                    
                                                                                
Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface      
                                                                                
       10.1.1.0/24  Direct  0    0           D   10.1.1.1        GigabitEthernet
0/0/0                                                                           
       10.1.1.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0                                                                           
     10.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0                                                                           
       14.1.1.0/24  Direct  0    0           D   14.1.1.1        GigabitEthernet
4/0/0                                                                           
       14.1.1.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
4/0/0                                                                           
     14.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
4/0/0                                                                           
       20.1.1.0/24  Direct  0    0           D   20.1.1.1        GigabitEthernet
0/0/2                                                                           
       20.1.1.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/2                                                                           
     20.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/2                                                                           
100.100.100.100/32  Static  60   0          RD   14.1.1.2        GigabitEthernet
4/0/0                                                                           
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0    
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0    
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0    
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0    
                                                                                
[RouterA] 

3. Check the OSPF status of RouterB.

[RouterB]display ospf peer brief                                                
                                                                                
         OSPF Process 1 with Router ID 10.1.1.2                                 
                  Peer Statistic Information                                    
 ----------------------------------------------------------------------------   
 Area Id          Interface                        Neighbor id      State       
 0.0.0.0          GigabitEthernet0/0/0             10.1.1.1         Full        
 ----------------------------------------------------------------------------   
 Total Peer(s):     1                                                           
[RouterB]

4. Check the routes of RouterB.

[RouterB]display ip routing-table                                               
Route Flags: R - relay, D - download to fib                                     
------------------------------------------------------------------------------  
Routing Tables: Public                                                          
         Destinations : 9       Routes : 9                                    
                                                                                
Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface      
                                                                                
       10.1.1.0/24  Direct  0    0           D   10.1.1.2        GigabitEthernet
0/0/0                                                                           
       10.1.1.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0                                                                           
     10.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0                                                                           
       14.1.1.0/24  OSPF    10   2           D   10.1.1.1        GigabitEthernet
0/0/0                                                                           
100.100.100.100/32  O_ASE   150  1           D   10.1.1.1        GigabitEthernet
0/0/0                                                                           
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0    
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0    
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0    
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0    
                                                                                
[RouterB]

5. Check the routes of the Cisco device.

server>show ip route                                                          
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP       
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area           
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2           
       E1 - OSPF external type 1, E2 - OSPF external type 2                     
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2    
       ia - IS-IS inter area, * - candidate default, U - per-user static route  
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP        
       a - application route                                                    
       + - replicated route, % - next hop override, p - overrides from PfR      
                                                                                
Gateway of last resort is not set                                               
                                                                                
      10.0.0.0/8 is variably subnetted, 5 subnets, 2 masks                      
O        10.1.1.0/24 [110/2] via 14.1.1.1, 00:00:01, GigabitEthernet0/1         
C        10.9.0.0/24 is directly connected, Loopback1                           
server>
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 20132

Downloads: 434

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next