Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RouterB
Procedure
- Configure an IP address for GE0/0/0 of Router
B. By default, the network type of Ethernet interfaces is broadcast.
Therefore, the OSPF network type does not need to be configured here.
<Huawei>system-view [Huawei]sysname RouterB [RouterB]interface GigabitEthernet 0/0/0 [RouterB-GigabitEthernet0/0/0]ip address 10.1.1.2 255.255.255.0 [RouterB-GigabitEthernet0/0/0]quit
- Configure an OSPF route.
[RouterB]ospf 1 router-id 10.1.1.2 [RouterB-ospf-1]area 0.0.0.0 [RouterB-ospf-1-area-0.0.0.0]network 10.1.1.0 0.0.0.255 [RouterB-ospf-1-area-0.0.0.0]quit
Previous
