No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Networking Requirements

Networking Requirements

A large-sized enterprise has the headquarters (Hub) and multiple branches (Spoke1, Spoke2, and other Spokes) located in different areas, and the branches connect to public networks using dynamic IP addresses. This example uses two branches. The Hub is a Cisco router, and Spoke1 and Spoke2 are AR routers.

The enterprise requires that VPN connections between branches should be achieved and data transmitted between the headquarters and a branch, and between branches should be encrypted.

Figure 17-2  Networking for establishing DSVPN over IPSec tunnels between AR routers and Cisco router
Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 20585

Downloads: 436

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next