No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RouterA

Configuring RouterA

Configuration Roadmap

  1. Configure IP addresses for interfaces of RouterA.
  2. Configure OSPF routes.


  1. Configure IP addresses for GE0/0/0 and GE4/0/0 of RouterA. By default, the network type of Ethernet interfaces is broadcast. Therefore, the OSPF network type does not need to be configured here.

    [Huawei]sysname RouterA
    [RouterA]interface GigabitEthernet0/0/0
    [RouterA-GigabitEthernet0/0/0]ip address
    [RouterA]interface GigabitEthernet4/0/0
    [RouterA-GigabitEthernet4/0/0]ip address

  2. Configure OSPF routes.

    [RouterA]ospf 1 router-id

Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 23492

Downloads: 459

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next