No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RouterA

Configuring RouterA

Configuration Roadmap

  1. Configure the 2BST card to work in NT mode and configure the clock source.
  2. Configure RouterA to work in PBX mode.
  3. Configure media and signaling IP address pools.
  4. Configure the SIP server to connect the IP phone to the PBX.
  5. Configure intra-office prefix 62, outgoing prefix 9, user number, BRA trunk group, and call route to implement intra-office and inter-office calls.

Procedure

  1. Configure the 2BST card to work in NT mode and configure the clock source.

    # Configure the 2BST card to work in NT mode.

    <Huawei> system-view
    [Huawei] sysname RouterA
    [RouterA] set workmode slot 1 bri bri-voice nt-mode
    Warning: Changing the working mode will reset the board in slot 1. Continue? [y/n]:y
    INFO: Resetting board[1] succeeded.

    # onfigure the clock source.

    [RouterA] clock source 1 1/0/0 priority 9

  2. Configure RouterA to work in PBX mode.

    [RouterA] voice
    [RouterA-voice] service-mode pbx
    [RouterA-voice] return
    <RouterA> save
    The current configuration will be written to the device.                      
      Are you sure to continue? (y/n)[n]:y
    <RouterA> reboot
    Info: The system is comparing the configuration, please wait.                   
    System will reboot! Continue ? [y/n]:y

  3. Configure the IP address of 10.1.1.1 for GE0/0/0 and add the IP address of 10.1.1.1 to media and signaling IP address pools.

    <RouterA> system-view
    [RouterA] interface  GigabitEthernet 0/0/0
    [RouterA-GigabitEthernet0/0/0] ip address 10.1.1.1 24
    [RouterA-GigabitEthernet0/0/0] quit
    [RouterA] voice
    [RouterA-voice] voip-address media interface gigabitethernet 0/0/0 10.1.1.1
    [RouterA-voice] voip-address signalling interface gigabitethernet 0/0/0 10.1.1.1

  4. Configure the SIP server.

    [RouterA-voice] sipserver
    [RouterA-voice-sipserver] signalling-address ip 10.1.1.1 port 5060
    [RouterA-voice-sipserver] media-ip 10.1.1.1
    [RouterA-voice-sipserver] register-uri abcd.com
    [RouterA-voice-sipserver] home-domain abcd.com
    [RouterA-voice-sipserver] reset
    [RouterA-voice-sipserver] quit

  5. Configure intra-office prefix 62 and outgoing prefix 9.

    # Configure intra-office prefix 62.

    [RouterA-voice] callprefix 62
    [RouterA-voice-callprefix-62] prefix 62
    [RouterA-voice-callprefix-62] call-type category basic-service attribute 0
    [RouterA-voice-callprefix-62] digit-length 2 5
    [RouterA-voice-callprefix-62] quit
    

    # Configure outgoing prefix 9.

    [RouterA-voice] callprefix 9
    [RouterA-voice-callprefix-9] prefix 9
    [RouterA-voice-callprefix-9] call-type category basic-service attribute 1
    [RouterA-voice-callprefix-9] digit-length 4 4
    [RouterA-voice-callprefix-9] quit

  6. Configure user numbers.

    # Configure the POTS user with user number 6201.

    [RouterA-voice] pbxuser 6201 pots
    [RouterA-voice-pbxuser-6201] port 2/0/1
    [RouterA-voice-pbxuser-6201] telno 6201
    [RouterA-voice-pbxuser-6201] quit
    

    # Configure the SIP user with user number 6202.

    [RouterA-voice] pbxuser 6202 sipue
    [RouterA-voice-pbxuser-6202] sipue 6202
    [RouterA-voice-pbxuser-6202] telno 6202
    [RouterA-voice-pbxuser-6202] quit

  7. Configure the BRA trunk group bra.

    [RouterA-voice] trunk-group bra bra-dss1
    [RouterA-voice-trunkgroup-bra] trunk-bra 1/0/0
    [RouterA-voice-trunkgroup-bra] quit
    

  8. Configure a call route and save the configuration.

    [RouterA-voice] callroute BRA  
    [RouterA-voice-callroute-BRA] quit
    [RouterA-voice] trunk-group bra
    [RouterA-voice-trunkgroup-bra] callroute BRA
    [RouterA-voice-trunkgroup-bra] quit
    [RouterA-voice] callprefix 9 
    [RouterA-voice-callprefix-9] callroute BRA
    [RouterA-voice-callprefix-9] save
    

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 20204

Downloads: 434

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next