No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Precautions

Precautions

  • The AR uses a 2BST card to connect to a Cisco device through the RJ45 interface, and needs to be configured to work in NT mode.
  • The voice functions are controlled by the license. By default, voice functions are disabled on a newly purchased device. To use the voice functions, apply for and purchase the license.
  • In this example, the commands on the Cisco router are recommended ones. The product version is Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M1, RELEASE SOFTWARE (fc1). For details, visit http://www.cisco.com/techsupport.
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 20095

Downloads: 432

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next