No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Optical Transceivers

Configuring Optical Transceivers

No configuration is required after an optical transceiver is powered on. Ensure that the wire sequence of the 120-ohm DB9-to-RJ45 cable matches that of the optical transceiver interface. Table 1 provides the wire sequence. If the wire sequence of the E1 cable (RJ45) does not match that of the optical transceiver interface, make a new E1 cable (RJ45) according to the wire sequence of the optical transceiver interface.

Table 15-6  Wire sequence of the E1 cable (RJ45) and optical transceiver interface

Wire Sequence of the E1 Cable (RJ45)

Wire Sequence of the Optical Transceiver Interface

4 (Rx +)

1 (Tx +)

5 (Rx -)

2 (Tx -)

1 (Tx +)

4 (Rx +)

2 (Tx -)

5 (Rx -)

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 20313

Downloads: 434

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next