No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Exception Handling

Exception Handling

  1. If the outgoing or incoming call fails, run the display voice trunk-group bra trunk-circuit state brief command to check the link status of the BRI trunk. If the link status is Fault, check the BRI line.
  2. If the physical line is correctly connected but the link status is Fault, run the debugging voice dss1 all command to enable log debugging of the DSS1 module and contact technical support personnel.
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 23075

Downloads: 451

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next