No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the AR

Configuring the AR

Configuration Roadmap

The configuration roadmap is as follows:

  1. Configure a voice user.

  2. Configure a call route and a SIP trunk group.

  3. Configure intra-office and inter-office call prefixes.

Procedure

  1. Configure a voice user.

    <Huawei> system-view
    [Huawei] voice
    [Huawei-voice] pbxuser 82000 pots
    [Huawei-voice-pbxuser-82000] port 1/0/0
    [Huawei-voice-pbxuser-82000] telno 82000
    [Huawei-voice-pbxuser-82000] quit

  2. Configure a call route UCM.

    [Huawei] voice
    [Huawei-voice] callroute UCM
    [Huawei-voice-callroute-UCM] quit

  3. Create and configure a trunk group UCM1.

    [Huawei-voice] trunk-group UCM1 sip no-register
    [Huawei-voice-trunkgroup-UCM1] callroute UCM
    [Huawei-voice-trunkgroup-UCM1] signalling-address ip 10.1.1.2 port 5070
    [Huawei-voice-trunkgroup-UCM1] media-ip 10.1.1.2
    [Huawei-voice-trunkgroup-UCM1] peer-address static 10.1.1.3 5060
    [Huawei-voice-trunkgroup-UCM1] home-domain 10.1.1.3
    [Huawei-voice-trunkgroup-UCM1] number-parameter 53 0
    [Huawei-voice-trunkgroup-UCM1] reset
    [Huawei-voice-trunkgroup-UCM1] quit
    [Huawei-voice] 
     Note: Trunkgroup reset succeeds.

  4. Configure intra-office and inter-office call prefixes.

    # Configure an intra-office call prefix. Create a call prefix profile 82, set the call prefix to 82, specify the basic service, configure the intra-office call, and set the maximum and minimum lengths of a number that can be parsed to 5 and 2 respectively.

    [Huawei-voice] callprefix 82
    [Huawei-voice-callprefix-82] prefix 82
    [Huawei-voice-callprefix-82] call-type category basic-service attribute 0
    [Huawei-voice-callprefix-82] digit-length 2 5
    [Huawei-voice-callprefix-62] quit

    # Configure an inter-office call prefix. Create a call prefix profile 80, set the call prefix to 80, specify the basic service, configure the local call, and set the maximum and minimum lengths of a number that can be parsed to 5 and 2 respectively.

    [Huawei-voice] callprefix 80
    [Huawei-voice-callprefix-80] prefix 80
    [Huawei-voice-callprefix-80] call-type category basic-service attribute 1
    [Huawei-voice-callprefix-80] callroute UCM
    [Huawei-voice-callprefix-80] digit-length 2 5
    [Huawei-voice-callprefix-80] quit

  5. Save the configuration.

    [Huawei-voice] save

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 22728

Downloads: 450

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next