No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Alcatel DSLAM

Configuring the Alcatel DSLAM

Configuration Roadmap

  1. Configure the SHDSL interface type, including the transmission rate, line rate, and modulation mode.
  2. Configure a service model.

Procedure

  1. Configure the SHDSL interface type.

    # Activate the SHDSL interface.

    configure interface port shdsl-line:1/1/19/2 admin-up link-updown-trap user FREE

    # Configure VLAN-Port 1036 and VLAN-Port 1035.

    configure interface port vlan-port:1/1/19/2:1036 admin-up severity no-value
    configure interface port vlan-port:1/1/19/2:1035 admin-up severity no-value
    # Set the transfer mode of the SHDSL interface to EFM, line rate to 1536 kbps-2304 kbps, and modulation mode to 16 PAM. The EFM mode corresponds to the PTM mode of the G.SHDSL interface on the Huawei AR. On the Huawei AR, the default modulation mode is auto, and the 16 PAM mode can be automatically delivered based on the modulation mode of the remote end.
    configure shdsl span 1/1/19/2 active admin-up op-mode efm min-line-rate 1536 max-line-rate 2304 tc-pam-sele tc-pam16 efm-hs-sele auto

  2. Configure a service model.

    # Limit the number of unicast MAC addresses.

    configure interface port shdsl-line:1/1/19/2 admin-up link-updown-trap user FREE

    # Configure VLAN translation and bind the QoS profile to the Alcatel DSLAM.

    configure bridge port 1/1/19/2 vlan-id 1035 tag single-tagged network-vlan 1602 vlan-scope local qos profile:trusted-port
    configure bridge port 1/1/19/2 vlan-id 1036 tag single-tagged network-vlan 3602 vlan-scope local qos profile:trusted-port

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 22891

Downloads: 451

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next