No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Smart Provisioning User Guide 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Upgrading Firmware

Upgrading Firmware

The upgrade duration of the firmware of a single NIC, RAID controller card, or hard disk is within 10 minutes. After an upgrade is complete, you need to manually restart the OS for the upgrade to take effect.

  1. Download the firmware package (in .zip format) and digital signature of the component to be upgraded from the Support-E website.

    NOTE:

    The firmware upgrade package must contain install.sh.

  2. Log in to Smart Provisioning. For details, see Logging In to Smart Provisioning.

    The Smart Provisioning main window is displayed, as shown in Figure 10-155.

    Figure 10-155 Smart Provisioning main window

  3. In the Smart Provisioning main window, click Upgrade.

    The upgrade main window is displayed, as shown in Figure 10-156.

    Figure 10-156 Upgrade main window

  4. Click on the toolbar.

    The virtual DVD-ROM drive dialog box is displayed, as shown in Figure 10-157.

    Figure 10-157 Virtual DVD-ROM drive

  5. Select Directory and click Browse.

    The Open dialog box is displayed.

  6. Select the folder where the firmware package and digital signature are located, and click Open.
  7. Click Connect.

    When Connect changes to Disconnect, the local folder is successfully mounted.

  8. In the upgrade main window, select Firmware and click Next.

    The Select Upgrade Device window is displayed, as shown in Figure 10-158.

    Figure 10-158 Select Upgrade Device
    NOTE:

    If All Firmware Packages is selected, the information of all firmware packages in the folder will be displayed. If Matched Devices is selected, the information of firmware that can be upgraded will be displayed.

  9. Select the component to be upgraded, and click Next, as shown in Figure 10-158.

    The Upgrade Result window is displayed.

  10. View the upgrade status. If information similar to that shown in Figure 10-159 is displayed, the upgrade is successful.

    Figure 10-159 Upgrade succeeded

  11. Click Exit to return to the Smart Provisioning main window.
  12. Manually restart the OS for the upgrade to take effect.
Translation
Download
Updated: 2019-05-11

Document ID: EDOC1100034052

Views: 27095

Downloads: 342

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next