No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Smart Provisioning User Guide 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to Smart Provisioning

Logging In to Smart Provisioning


If you use the independent remote console to upgrade the firmware, the version of the independent remote console must be or later.

  1. During the server restart process, press F6 on the boot option selection screen shown in Figure 7-1.

    Figure 7-1 Boot option selection screen

  2. If a dialog box prompting you to enter a password is displayed during the startup process, enter a password (the default password is Admin@9000) as prompted and press Enter.

    The Smart Provisioning welcome window is displayed, as shown in Figure 7-2.
    Figure 7-2 Smart Provisioning welcome window

    When you use Smart Provisioning, you can click in the upper right corner to return to the welcome window.

  3. Click Start.

    The Smart Provisioning main window is displayed, as shown in Figure 7-3.

    Figure 7-3 Smart Provisioning main window

Updated: 2019-05-11

Document ID: EDOC1100034052

Views: 27082

Downloads: 342

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next