No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Smart Provisioning User Guide 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Some RAID Controller Cards Cannot Be Identified in a Multi-RAID Controller Card Scenario in Legacy Mode

Some RAID Controller Cards Cannot Be Identified in a Multi-RAID Controller Card Scenario in Legacy Mode

Symptom

The 2288H V5 server is configured with the Avago SAS3004iMR standard card and the Avago SAS3416IT controller card. When the server is started in legacy mode, only the Avago SAS3004iMR standard card is identified.

Cause

If the M.2 card and RAID controller card are both configured, the M.2 card is loaded preferentially due to insufficient resources.

Solution

Smart Provisioning does not support this scenario currently.

Translation
Download
Updated: 2019-05-11

Document ID: EDOC1100034052

Views: 21645

Downloads: 302

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next