No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.71 hwMplsResourceThresholdExceed

LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.71 hwMplsResourceThresholdExceed

Description

LSPM/3/MPLSRESOURCETHRESHOLDEXCEED: OID [oid] The number of used MPLS resources exceeded the threshold. (hwMplsResourceType=[integer], hwMplsResourceCurrentCount=[integer], hwMplsResourceThreshold=[integer], hwMplsResourceTotalCount=[integer])

The proportion of used MPLS resources to all MPLS resources supported by a device reached the upper alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.121.2.1.71

Minor

qualityOfServiceAlarm(3)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwMplsResourceType

Type of MPLS resource

hwMplsResourceCurrentCount

Number of available MPLS resources

hwMplsResourceThreshold

Upper alarm threshold for MPLS resource usage

hwMplsResourceTotalCount

Maximum number of MPLS resources supported by a device

Impact on the System

If new MPLS services are created after the number of existing MPLS resources of a specific type has exceeded the upper threshold, services may be affected.

Possible Causes

The number of MPLS resources of a specific type reached the upper threshold.

Procedure

  1. Check the hwMplsResourceType field and obtain the MPLS resource type.
  2. Check whether hwMplsResourceThreshold is set in a specified range.
    • If the value is within the specified range, go to Step 4.
    • If the value is out of the specified range, go to Step 3.
  3. Change the alarm threshold to be within the specified range. Then check whether the alarm is cleared.
    • If the alarm is cleared, go to Step 6.
    • If the alarm persists, go to Step 4.
  4. Delete configurations that use MPLS resources or configurations or messages that trigger MPLS resource consumption to reduce MPLS resource usage. Then check whether the alarm is cleared.
    • If the alarm is cleared, go to Step 6.
    • If the alarm persists, go to Step 5.
  5. Collect alarm information and configuration information, and then contact technical support personnel..
  6. End.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 137942

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next