No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L3VPN_1.3.6.1.2.1.10.166.11.0.1 mplsL3VpnVrfUp

L3VPN_1.3.6.1.2.1.10.166.11.0.1 mplsL3VpnVrfUp

Description

L3VPN/2/L3V_TRAP_VRF_UP:OID [oid] The interface bound to the VPN instance went Up. (VpnInstanceName=[octet], IfIndex=[integer], BindingVpnInstanceName=[octet], IfCurRowStatus=[integer], VRFOperationStatus=[integer], IfName=[octet])

One of the interfaces in the Down state that are bound to VPN instance goes Up.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.2.1.10.166.11.0.1

Major

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

VpnInstanceName

Indicates the name of the VPN.

IfIndex

Indicates the index of the interface.

BindingVpnInstanceName

Indicates the name of the binding VPN .

IfCurRowStatus

Indicates the row status of the interface. Including:

  • 1: Active

  • 2: Not in Service

  • 3: Not Ready

  • 4: Create and Go

  • 5: Create and Wait

  • 6: Destroy

VRFOperationStatus

Indicates the status of the VRF. Including:

  • 1: Up

  • 2: Down

IfName

Indicates the name of the interface.

Impact on the System

At least one available interface is bound with the VPN instance.

Possible Causes

1. No interface was bound with the VPN instance, and the status of the first interface bound with the VPN instance changed from Down to Up.

2. One interface was bound with the VPN instance, and the interface status changed from Down to Up.

3. Multiple interfaces were bound with the VPN instance, all the interfaces went Down, and then the first interface went Up.

Procedure

  • This alarm message is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 145748

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next