No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SUPPLYFAULT

SUPPLYFAULT

Description

HUAWEI POE/SUPPLYFAULT: Chip VEE undervoltage lockout condition.(chipIndex=[integer])

The chip is in an undervoltage lockout condition.

Attribute

Alarm ID Alarm Severity Alarm Type
None None None

Parameters

Name Meaning
chipIndex Indicates the chip ID.

Impact on the System

All the PDs connected to the device cannot be powered on.

Possible Causes

A power failure occurs.

Procedure

  • Check whether the voltage meets product specifications. Run the reboot command to restart the device. If the fault persists, replace the device.

Related Information

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100034065

Views: 132136

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next