No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RIP_1.3.6.1.4.1.2011.5.25.120.3.2 hwRip2DBOverFlowResume

RIP_1.3.6.1.4.1.2011.5.25.120.3.2 hwRip2DBOverFlowResume

Description

RIP/2/DBOVERFLOWRESUME:OID [oid] The number of routes reached the lower threshold, and thus RIP process recovered from the suspension state and resumed processing packets. (ProcTableIndex=[INTEGER], ProcessId=[INTEGER], DataBaseLimit=[GAUGE], ThresholdLevel=[OCTET])

The RIP database size has dropped to the lower threshold from frozen state and allowed routes can be added to RIP by redistribution or by learning.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.120.3.2

Major processingErrorAlarm (4)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

ProcTableIndex

Indicates the index of the process table.

ProcessId

Indicates the current process ID.

DataBaseLimit

Indicates the current database limit.

ThresholdLevel

Indicates the current database threshold level set for the process.

Impact on the System

None.

Possible Causes

The process reached its maximum allowed routes in its database, and user is deleting routes.

Procedure

  1. This alarm message is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100034065

Views: 132432

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next