No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.5 hwUnAuthorizedApRecordExistTrap

WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.5 hwUnAuthorizedApRecordExistTrap

Description

WLAN/4/UNAUTHORIZED_AP_RECORD_EXIST_NOTIFY:OID [oid] Unauthorized AP record exists.(Record number=[INTEGER])

An unauthorized AP alarm exists.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.6.139.13.1.1.5

Warning

equipmentAlarm(5)

Parameters

Name Meaning

OID

Indicates the ID of the MIB object.

Record number

Indicates the number of APs failing authentication.

Impact on the System

Rogue APs occupy links.

Possible Causes

1:

The AP authentication mode is set to MAC address authentication, but the AP is not added offline and its MAC address is not in the whitelist.

2:

The AP authentication mode is set to SN authentication, but the AP is not added offline and its SN is not in the whitelist.

Procedure

  1. Add authorized APs to the whitelist (add SNs or MAC addresses to the whitelist according to the AP authentication mode). Then, check whether the alarm persists.

    • If so, go to Step 2.
    • If not, go to Step 3.

  2. Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
  3. End.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 137404

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next