No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFNET_1.3.6.1.4.1.2011.5.25.157.2.241 hwPortSpeedChangeTrap

IFNET_1.3.6.1.4.1.2011.5.25.157.2.241 hwPortSpeedChangeTrap

Description

IFNET/4/PORT_SPEED_CHANGED:OID [OID] The port speed is changed . (PhysicalIndex=[INTEGER], PhysicalName="[OCTET]", OldSpeed=[INTEGER], NewSpeed=[INTEGER])

The interface rate changed.

NOTE:

Currently, this alarm is only supported on xDSL interfaces.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.157.2.241 Warning equipmentAlarm(5)

Parameters

Name Meaning
OID

Indicates the MIB object ID of the alarm.

PhysicalIndex Indicates the interface index.
PhysicalName Indicates the interface name.
OldSpeed Indicates the original interface rate.
NewSpeed Indicates the changed interface rate.

Impact on the System

None

Possible Causes

Cause 1:

The interface alternated between Up and Down states.

Cause 2:

The rate of the remote interface changed.

Procedure

  • Check whether the interface status changed or whether the network was unstable.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 144140

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next