No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MRM_1.3.6.1.4.1.2011.5.25.149.1.2.13 hwIpMcastSGThresholdExceed

MRM_1.3.6.1.4.1.2011.5.25.149.1.2.13 hwIpMcastSGThresholdExceed

Description

MRM/3/hwIpMcastSGThresholdExceed:OID [oid] Multicast routing total (S, G) entries of all instances count reached the upper threshold. (hwIpMcastSGCurrentCount=[integer], hwIpMcastSGThreshold=[integer]%, hwIpMcastSGTotalCount=[integer])

The proportion of global (S, G) multicast forwarding entries created to the maximum global (S, G) multicast forwarding entries allowed reached the upper alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.1.2.13

Minor

communicationsAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwIpMcastSGCurrentCount

Number of global (S, G) multicast forwarding entries created

hwIpMcastSGThreshold

Alarm threshold for global (S, G) multicast forwarding entries

hwIpMcastSGTotalCount

Maximum number of global (S, G) multicast forwarding entries allowed

Impact on the System

If you continue to configure multicast services after this alarm is reported, new multicast services may fail to be provisioned due to the lack of (S, G) multicast forwarding entry resources.

Possible Causes

The proportion of global (S, G) multicast forwarding entries created to the maximum global (S, G) multicast forwarding entries allowed reached the upper alarm threshold.

Procedure

  1. Check whether the upper alarm threshold is too low in the configuration file.

    • If the threshold is too low, go to Step 2.

    • If the threshold is not low, go to Step 3.

  2. Run the multicast forwarding-table source-group-number threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value command in the multicast MIB view to set the upper alarm threshold to a larger value.
  3. Confirm whether network expansion is required. If network expansion is required, contact technical support personnel.
  4. End.

Related Information

None

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 150027

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next