No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF_1.3.6.1.2.1.14.16.2.9 ospfVirtIfRxBadPacket

OSPF_1.3.6.1.2.1.14.16.2.9 ospfVirtIfRxBadPacket

Description

OSPF/4/VIFBADRX:OID [oid]: An OSPF packet that is received on a virtual interface cannot be parsed. (VirtIfAreaId=[area-id], VirtIfNeighbor=[neighbor-router-id], ProcessId=[process-id], RouterId=[router-id], PacketType=[packet-type], InstanceName=[instance-name])

An OSPF packet that cannot be parsed was received from a virtual-link interface. The possible cause was that the device was attacked or the interconnection between the Huawei device and non-Huawei device failed.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.2.1.14.16.2.9 Warning environmentalAlarm (6)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

VirtIfAreaId

Indicates the area ID.

VirtIfNeighbor

Indicates the router ID of the neighbor on the virtual link.

ProcessId

Indicates the process ID.

RouterId

Indicates the ID of the local router.

PacketType

Indicates the type of a packet.
  • 1: Hello packet
  • 2: DD packet
  • 3: Request packet
  • 4: Update packet
  • 5: Acknowledgement packet
  • 6: Update packet Retrans
  • 7: Update packet flood

InstanceName

Indicates the instance name.

Impact on the System

This trap message is generated when a virtual-link interface receives a packet that cannot be parsed and then discards this packet. This may cause the neighbor to be Down.

Possible Causes

An incorrect packet was generated by the virtual-link interface on the peer end.

Procedure

  1. Collect alarm information and configuration information, and then contact technical support personnel.
  2. End.

Related Information

None

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 152072

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next