No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MSDP_1.3.6.1.3.92.1.1.0.1 msdpEstablished

MSDP_1.3.6.1.3.92.1.1.0.1 msdpEstablished

Description

MSDP/2/ESTABLISHED:OID [oid] MSDP peer enter the established state. (RemoteAddr=[ipaddr], FsmEstablishedTransitons=[counter], InstanceName=[string])

The TCP connection between MSDP peers is established.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.3.92.1.1.0.1

Major

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

RemoteAddr

Indicates the peer address.

FsmEstablishedTransitons

Indicates the number of times that the status of the MSDP peer relationship changes to Established.

InstanceName

Indicates the instance name.

Impact on the System

Services will not be affected.

Possible Causes

This trap is generated when the connection between the local router and peer router set up by using the peer peer-address connect-interface interface-type interface-number command in the MSDP view went Established.

Procedure

  1. This alarm message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 142561

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next