No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.10 hwMgmdGMPGlobalLimitClear

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.10 hwMgmdGMPGlobalLimitClear

Description

MGMD/3/hwmgmdgmpgloballimitclear:OID [oid] The new report message can be processed because the number of IGMP or MLD group memberships in this instance falls below the upper limit. (GroupAddressType=[integer], SrcAddr=[binary], GrpAddr=[binary], LimitCnt=[integer], InstanceName=[string])

The number of global Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) entries for the groups in an instance fell below the upper threshold, and new hosts can join the groups.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.10

Minor

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

GroupAddressType

Indicates the inetAddressType of group address. The value can be:
  • 1: IPv4 address

  • 2: IPv6 address

SrcAddr

Source address contained in a Report message

GrpAddr

Group address contained in a Report message

LimitCnt

Upper threshold for the number of IGMP or MLD entries in an instance

InstanceName

Name of the instance

Impact on the System

None.

Possible Causes

The number of global IGMP or MLD entries for the groups in an instance fell below the upper threshold.

Procedure

  1. This alarm is informational only, and no action is required.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 150469

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next