No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PM_1.3.6.1.4.1.2011.5.25.190.1.13.1 hwPMMeasureExceed

PM_1.3.6.1.4.1.2011.5.25.190.1.13.1 hwPMMeasureExceed

Description

PM/3/hwPMMeasureExceed:OID [OID] The number of statistical indexes has reached the upper limit.

The number of indicators had reached the upper limit.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.190.1.13.1 Minor

qualityOfServiceAlarm

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

Impact on the System

The system will not be affected.

Possible Causes

The number of indicators had reached the upper limit.

Procedure

  1. Run the display this command in the PM view to check current statistical tasks and bound instances.
  2. Run one or more of the following commands to reduce performance statistics on the device:

    • Run the undo statistics-task task-name command to delete an unwanted statistical task.
    • Run the undo binding instance-type instance-type instance-type { all | instance { instance-name } & <1-5> } command to delete unwanted performance instances bound to a specified statistical task.
    • Run the measure disable[ measure-name ] command to disable unwanted measurement indicators in a statistical task.

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 138232

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next