No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2V_1.3.6.1.4.1.2011.5.25.119.4.1.2.4 hwPWVcUp

L2V_1.3.6.1.4.1.2011.5.25.119.4.1.2.4 hwPWVcUp

Description

L2V/2/PWE3VC_UP_ME_T:OID [oid] The status of the PWE3 VC turned UP. (VcId=[GAUGE], VcType=[INTEGER], PeerAddress=[IPADDR], InterfaceIndex=[INTEGER], VcInboundLabel=[GAUGE], VcOutboundLabel=[GAUGE], SecondaryPw=[INTEGER], HWL2VpnStateChangeReason=[INTEGER], SysUpTime=[TIMETICK], InterfaceName=[STRING], SwitchVcId=[GAUGE], TunnelPolicyName=[STRING], ActiveState=[INTEGER])

The trap was generated when the PWE3 VC was Up.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.119.4.1.2.4

Major

other(1)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

VcId

Indicates the ID of a VC.

VcType

Indicates the type of a VC:
  • 0: Initial value
  • 1: FR
  • 2: ATM AAL5
  • 3: ATM cell relay
  • 4: VLAN
  • 5: Ethernet
  • 6: HDLC
  • 7: PPP
  • 9: ATM cell VCC
  • 10: ATM cell VPC
  • 11: IP-layer 2 (used for heterogeneous IP-interworking between Huawei devices and non-Huawei devices)
  • 12: ATM, 1-to-1 VCC cell mode
  • 13: ATM, 1-to-1 VPC cell mode
  • 14: ATM, AAL5 PDU VCC TRANSPORT
  • 64: Heterogeneous IP-interworking

PeerAddress

Indicates the IP address of a peer.

InterfaceIndex

Indicates the interface index.

VcInboundLabel

Indicates the incoming label of a VC.

VcOutboundLabel

Indicates the outgoing label of a VC.

SecondaryPw

Whether the PW is a secondary PW
  • 1: The PW is a secondary PW.
  • 2: The PW is not a secondary PW.

HWL2VpnStateChangeReason

Indicates the cause for the VC status change.

SysUpTime

Indicates the time for the system startup.

InterfaceName

Indicates the interface name.

SwitchVcId

Switches the ID of VC.

TunnelPolicyName

Indicates the name of a tunnel policy.

ActiveState

Indicates the status of active.

Impact on the System

The PWE3 service is recovered.

Possible Causes

A VC recovers from a fault.

Procedure

  1. This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 145148

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next