No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1.3.6.1.4.1.2011.6.139.2.1.1.48 hwStationSignalStrengthLowThanThresholdNotify(for FAT AP)

WLAN_1.3.6.1.4.1.2011.6.139.2.1.1.48 hwStationSignalStrengthLowThanThresholdNotify(for FAT AP)

Description

WLAN/4/STATION_SIGNAL_STRENGTH_LOW_THAN_THRESHOLD_NOTIFY: OID [oid] Signal strength of the Station is lower than threshold. (APID=[INTEGER], STAMAC=[OPAQUE], APMAC=[OPAQUE], RadioID=[INTEGER], StaSignalStrength=[LONG], SignalStrengthThreshold=[LONG])

The AP reports this alarm when detecting that the signal strength of an STA is lower than the access limit threshold.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.139.2.1.1.48 Warning communicationsAlarm(2)

Parameters

Name Meaning
OID Indicates the ID of a MIB object.
APID Indicates the AP ID.
STAMAC Indicates the MAC address of a wireless user.
APMAC Indicates the MAC address of an AP.
RadioID Indicates the radio ID.
StaSignalStrength Indicates the signal strength of an STA.
SignalStrengthThreshold Indicates the access signal strength threshold specified on an AP.

Impact on the System

This alarm affects the process for a user to go online.

Possible Causes

The access limit threshold has been configured in a radio profile, and STAs whose RSSI is lower than the threshold attempted to connect to the device.

Procedure

  1. Run the display radio-profile { all | id profile-id | name profile-name } command to verify that the value of Signal strength value(dBm) in the radio profile is proper.

Related Information

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100034065

Views: 132510

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next