No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.48 hwMplsTunnelHotstandbyUp

LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.48 hwMplsTunnelHotstandbyUp

Description

LSPM/2/MPLSTUNHSBUP:OID [oid] The hot-standby LSP of the tunnel changes to Up. (SessionTunnelId=[INTEGER], TunnelInstIndex=[integer], IngressLsrId=[integer], EgressLsrId=[integer], mplsTunnelIfName=[octet])

The hot-standby LSP of the tunnel changes to Up.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.121.2.1.48

Major

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

SessionTunnelId

Indicates the ID of the tunnel.

TunnelInstIndex

Indicates the InstIndex of the tunnel.

IngressLsrId

Indicates the LSR ID of the ingress on the tunnel.

EgressLsrId

Indicates the LSR ID of the egress on the tunnel.

mplsTunnelIfName

indicates the name of a tunnel.

Impact on the System

Services will not be affected.

Possible Causes

The hot-standby LSP of the tunnel changes to Up.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100034065

Views: 132305

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next