No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.15.1 hwMemUtilizationRising

ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.15.1 hwMemUtilizationRising

Description

ENTITYTRAP/2/MEMORYUSAGERISING: OID [oid] Memory utilization exceeded the pre-alarm threshold.(Index=[INTEGER], HwEntityPhysicalIndex=[INTEGER], PhysicalName="[OCTET]", EntityThresholdType=[INTEGER], EntityThresholdWarning=[INTEGER], EntityThresholdCurrent=[INTEGER], EntityTrapFaultID=[INTEGER])

The memory usage is too high.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.219.2.15.1 Major equipmentAlarm(5)

Parameters

Name Meaning
OID

Indicates the MIB object ID of the alarm.

Index Indicates the entity index.
PhysicalName Indicates the physical entity name.
EntityThresholdType Indicates the threshold type.
EntityThresholdWarning Indicates the alarm threshold.
EntityThresholdCurrent Indicates the current memory usage.
EntityTrapFaultID Indicates the error code.

Impact on the System

Services are affected. The system will restart after generating this alarm.

Possible Causes

Too many services are configured.

Procedure

  • Run the display current-configuration command to check service configurations and contact technical support personnel.
Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100034065

Views: 130814

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next