No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AMPADP_1.3.6.1.4.1.2011.6.158.51.2.0.3 hwProtTypeAdaptSucessAlarmTrap

AMPADP_1.3.6.1.4.1.2011.6.158.51.2.0.3 hwProtTypeAdaptSucessAlarmTrap

Description

AMPADP/4/ADAPT_SUCCESS: OID [oid] Port type adaptation success.

The port type is successfully adapted.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.158.51.2.0.3 Minor environmentalAlarm(6)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Impact on the System

None

Possible Causes

The port type of the interconnected OLT-side card is changed, and the uplink port of the ONU is successfully adapted.

Procedure

  • This alarm is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 145188

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next