No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1.3.6.1.4.1.2011.6.139.16.1.1.1.18 hwRadioAntennaGainIsUnlawfulTrap

WLAN_1.3.6.1.4.1.2011.6.139.16.1.1.1.18 hwRadioAntennaGainIsUnlawfulTrap

Description

WLAN/4/AP_RADIO_ANTENNA_GAIN_IS_UNLAWFUL:OID [oid] AP radio antenna gain is unlawful notify.(APMAC=[OPAQUE], RadioID=[INTEGER], APName=[OCTET], ACTUAL ANTENNA GAIN=[INTEGER], LEGITIMATE ANTENNA GAIN=[INTEGER], APID=[INTEGER])

The AP reports invalid antenna gain.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.139.16.1.1.1.18 Warning processingErrorAlarm(4)

Parameters

Name Meaning
oid Indicates the ID of the MIB object.
APMAC Indicates the MAC address of an AP.
RadioID Indicates the radio ID of the AP.
APName Indicates the AP name.
ACTUAL ANTENNA GAIN Indicates the actual antenna gain.
LEGITIMATE ANTENNA GAIN Indicates the legitimate antenna gain.
APID Indicates the AP ID.

Impact on the System

None.

Possible Causes

The current antenna gain is invalid.

Procedure

  1. Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
  2. End.

Related Information

None.

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 150171

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next