No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BGP_1.3.6.1.4.1.2011.5.25.177.1.3.13 hwBgpRouteMaxExceed

BGP_1.3.6.1.4.1.2011.5.25.177.1.3.13 hwBgpRouteMaxExceed

Description

BGP/3/HWBGPROUTEMAXEXCEED:OID [oid] The number of BGP routes exceeded the maximum number. (RouteTypeIndex=[integer], MaximumNumber=[integer])

The number of BGP routes exceeded the maximum number that is allowed.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.177.1.3.13 Minor

qualityOfServiceAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

RouteTypeIndex

Index of the BGP route type

  • 1 IPv4: IPv4 routes, including IPv4 public network and IPv4 VPN routes
  • 2 IPv4 Public: IPv4 public network routes
  • 3 IPv4 VRF: IPv4 VPN routes
  • 4 IPv6: IPv6 routes, including IPv6 public network and IPv6 VPN routes
  • 5 IPv6 Public: IPv6 public network routes
  • 6 IPv6 VRF: IPv6 VPN routes
  • 7 L2AD: BGP L2VPN-AD routes

MaximumNumber

Maximum number of BGP routes of a specified type

Impact on the System

BGP routes will no longer be accepted. As a result, services will be affected.

Possible Causes

The number of BGP routes exceeded the maximum number that is allowed.

Procedure

  1. Check whether this alarm is caused by configuration or topology errors.

    • If this alarm is caused by configuration or topology errors, go to Step 2.

    • If this alarm is not caused by configuration or topology errors, go to Step 3.

  2. Correct the configuration or topology errors.

    If the number of BGP routes falls below the maximum number that is allowed after the configuration or topology errors are corrected, go to Step 4.

  3. If all the routes are necessary, determine whether to implement capacity expansion and contact technical support personnel.
  4. End.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 145745

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next