No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
GRE_1.3.6.1.4.1.2011.5.25.201.3.1_hwTunnelCreateFailOverThreshold

GRE_1.3.6.1.4.1.2011.5.25.201.3.1_hwTunnelCreateFailOverThreshold

Description

GRE/4/TUNNEL_CREATEFAIL_ALARM:OID [oid] The number of tunnel creation failures reached the threshold in a period.(TunnelType=[TunnelType], TunnelType=[TunnelType], CreateCheckPeriod =[CreateCheckPeriod], CreateFailThreshold =[CreateFailThreshold], OverflowTunnelCreateFailCnt=[OverflowTunnelCreateFailCnt], PriorityTunnelCreateFailCnt=[PriorityTunnelCreateFailCnt])

The number of tunnel creation failures exceeded the alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.201.3.1 Warning other

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

TunnelType

Tunnel type (Overflow)

TunnelType

Tunnel type (Priority)

CreateCheckPeriod

Period

CreateFailThreshold

Maximum number of tunnel creation failures

OverflowTunnelCreateFailCnt

Number of Overflow tunnel creation failures

PriorityTunnelCreateFailCnt

Number of Priority tunnel creation failures

Impact on the System

Services will not be affected.

Possible Causes

Cause:

The number of tunnel creation failures in a period exceeded the alarm threshold. By default, an alarm is generated if 100 tunnels fail to be created within 15 minutes.

Procedure

  • This log message is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 144108

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next