No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPSEC_1.3.6.1.4.1.2011.6.122.26.6.13 hwIKESaPhase1Establish

IPSEC_1.3.6.1.4.1.2011.6.122.26.6.13 hwIKESaPhase1Establish

Description

IPSEC/4/IKESAPHASE1ESTABLISHED: OID [OID] IKE phase1 sa established. (PeerAddress=[PeerAddress], PeerPort=[PeerPort], LocalAddress=[LocalAddress], AuthMethod=[AuthMethod], AuthID=[AuthID], IDType=[IDType], VsysName=[vsys-name], Role=[Role])

The IKE SA has been established.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.122.26.6.13 Warning Communications alarm

Parameters

Name Meaning
OID Indicates the MIB object ID of the alarm.
PeerAddress Indicates the IP address of the tunnel's remote end.
PeerPort Indicates the port number of the peer end of the IPSec tunnel.
LocalAddress Indicates the IP address of the tunnel's local end.
AuthMethod Indicates the authentication method.
AuthID Indicates the ID of the tunnel's remote end.
IDType Indicates the type of the remote end ID.

vsys-name

Indicates the name of the virtual system to which the IKE SA belongs.

NOTE:

The device does not support this parameter.

Role

Device role during SA negotiation:

  • Initiator: The device functions as the SA negotiation initiator.
  • Responder: The device functions as the SA negotiation responder.

Impact on the System

Services are not affected.

Possible Causes

The IKE SA has been established.

Procedure

  • This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 150874

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next