No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF_1.3.6.1.4.1.2011.5.25.155.31.20 hwOspfv2DeleteRouteByPurge

OSPF_1.3.6.1.4.1.2011.5.25.155.31.20 hwOspfv2DeleteRouteByPurge

Description

OSPF/1/DELETEROUTE_BY_PURGE: OID [oid] The local device deleted OSPF routes advertised by other devices. Reset or isolate the device from the network. (SysProcessId=[integer], HostName=[octet], HostIpAddress=[ipaddr], RouterID=[ipaddr], Area=[ipaddr], FlushLsaNum=[integer], AffectedNodeNum=[integer], TotalNodeNum=[integer], Interval=[integer])

The local device flushed OSPF LSAs advertised by other devices. The local device needs to be reset or isolated from the network.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.155.31.20

Critical

communicationsAlarm(2)

Parameters

Name Meaning

SysProcessId

Process ID on the faulty node

HostName

Hostname of the faulty node

HostIpAddress

Host IP address of the faulty node

RouterID

Router ID in the process

Area

OSPF area ID

FlushLsaNum

Number of times an LSA was flushed

AffectedNodeNum

Number of affected nodes

TotalNodeNum

Total number of nodes on the network

Interval

Statistical period

Impact on the System

Network flapping occurs, which adversely affects network stability and traffic forwarding.

Possible Causes

The local device flushed OSPF LSAs advertised by other devices.

Procedure

  1. Reset or isolate the local device from the network.

Related Information

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100034065

Views: 130637

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next