No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPFV3_1.3.6.1.4.1.2011.5.25.147.0.7 hwOspfv3VirtIfRxBadPacket

OSPFV3_1.3.6.1.4.1.2011.5.25.147.0.7 hwOspfv3VirtIfRxBadPacket

Description

OSPFV3/3/VIFRXBADPKT:OID [oid] Error packet was received on the virtual interface. (AreaId=[integer], VirtualNbrRouterId=[gauge], RouterId=[gauge], VIfState=[integer], PacketType=[integer])

An OSPFv3 packet that cannot be parsed was received from a virtual link interface. A possible cause is that the Huawei device was attacked or the interconnection between the Huawei device and non-Huawei device failed.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.147.0.7 Minor processingErrorAlarm(4)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

AreaId

Indicates the ID of the OSPFv3 area. The value is a decimal integer.

VirtualNbrRouterId

Indicates the Router ID of the virtual neighbor. The value is a decimal integer.

RouterId

Indicates the Router ID of the local router. The value is a decimal integer.

VIfState

Indicates the status of a virtual link interface.
  • 1: Down
  • 2: Attempt
  • 3: Init
  • 4: 2-Way
  • 5: Exstart
  • 6: Exchange
  • 7: Loading
  • 8: Full

Packettype

Indicates the type of the packet.
  • 1: Hello
  • 2: DD(Data base Description) packet
  • 3: LS Request
  • 4: LS Update
  • 5: LS Acknowledgement
  • 6: NULL packet

Impact on the System

This trap is generated when a virtual link interface receives a packet that cannot be parsed and then discards this packet. This may cause the neighbor to go Down.

Possible Causes

An errored packet was generated by the interface on the remote end of the virtual link.

Procedure

  1. Collect alarm information and configuration information, and then contact technical support personnel.
  2. End.

Related Information

None

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 151982

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next