No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1.3.6.1.4.1.2011.6.139.15.1.1.12 hwWlanWidsPSKAttackClearTrap

WLAN_1.3.6.1.4.1.2011.6.139.15.1.1.12 hwWlanWidsPSKAttackClearTrap

Description

WLAN/4/WIDS_ATTACK_CLEAR_NOTIFY:OID [oid] Clear attack. (Monitor AP mac=[OPAQUE], Device Mac=[OPAQUE], Device channel=[INTEGER], Attack type=[INTEGER], Attack type string=[OCTET])

A brute force attack was cleared.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.139.15.1.1.12 Warning environmentalAlarm(6)

Parameters

Name Meaning
oid Indicates the OID of the alarm.
Monitor AP mac Indicates the MAC address of a monitoring AP.
Device Mac Indicates the MAC address of the attacking device.
Device channel Indicates the channel of the attacking device.
Attack type
Indicates the ID of attack type.
  • 14: brute force cracking attack in WEP-SK authentication mode
  • 15: brute force cracking attack in WPA-PSK authentication mode
  • 16: brute force cracking attack in WPA2-PSK authentication mode
  • 17: brute force cracking attack in WAPI authentication mode
Attack type string Indicates the name of attack type. For details, see attacks corresponding to the attack type IDs.

Impact on the System

None.

Possible Causes

A brute force attack was cleared or attacking device information was manually deleted.

Procedure

  1. No action is required.

Related Information

None.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100034065

Views: 132634

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next