No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PIM_1.3.6.1.4.1.2011.5.25.149.4.0.12 hwPimMrtLimitClear

PIM_1.3.6.1.4.1.2011.5.25.149.4.0.12 hwPimMrtLimitClear

Description

PIM/1/hwpimmrtlimitclear:OID [oid] PIM entries can be created because the number of PIM entries falls below the upper limit. (GrpAddrType=[integer], SrcAddr=[binary], GrpAddr=[binary], InstanceID=[integer], InstanceName=[string])

The number of Protocol Independent Multicast (PIM) entries fell below the upper threshold.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.4.0.12

Critical

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

GrpAddrType

Indicates the inetAddressType of the multicast group address. The value can be:
  • 1: IPv4 address

  • 2: IPv6 address

SrcAddr

Source address

GrpAddr

Group address

InstanceID

ID of the instance to which a PIM entry belongs

InstanceName

Name of the instance

Impact on the System

None.

Possible Causes

PIM entries were deleted and the number of existing PIM entries fell below the upper threshold defined in a PAF file.

Procedure

  1. This alarm is informational only, and no action is required.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 144695

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next