No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPFV3_1.3.6.1.4.1.2011.5.25.147.0.11 hwOspfv3VirtNbrRestartHelperStatusChange

OSPFV3_1.3.6.1.4.1.2011.5.25.147.0.11 hwOspfv3VirtNbrRestartHelperStatusChange

Description

OSPFV3/3/VNBRHELPERSTATUSCHNG:OID [oid] The helper status for the virtual neighbor has changed. (AreaId=[integer], VirtualNbrRouterId=[gauge], RouterId=[gauge], State=[integer], HelperAge=[integer], HelperExitReason=[integer])

The GR helper status of the OSPFv3 neighbor on the virtual link changed.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.147.0.11 Minor processingErrorAlarm(4)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

AreaId

Indicates the ID of the OSPFv3 area. The value is a decimal integer.

VirtualNbrRouterId

Indicates the Router ID of the virtual neighbor. The value is a decimal integer.

RouterId

Indicates the Router ID of the local router. The value is a decimal integer.

State

Indicates the state of the virtual neighbor.
  • 1: Down
  • 2: Attempt
  • 3: Init
  • 4: 2-Way
  • 5: Exstart
  • 6: Exchange
  • 7: Loading
  • 8: Full

HelperAge

indicates the remaining time of GR.

HelperExitReason

Indicates the cause why the route exits from the GR helper.
  • 1: None
  • 2: In progress
  • 3: Completed
  • 4: Time out
  • 5: Topology change

Impact on the System

This trap indicates that the neighbor on the virtual link enters the helper state or exits from the helper state. GR failure will affect the normal forwarding of routes.

Possible Causes

1. The neighbor also restarts when it functions as a GR helper.

2. The grace timer expired.

3. The grace LSA was received.

Procedure

  1. Run the display ospfv3 graceful-restart-information command to check the reason that the local router functions as the GR helper and check the current GR status.
  2. Perform the following operations as required:

    • If the active/standby switchover is performed manually or the OSPFv3 process is restarted in GR mode, go to Step 4.

    • If this trap is generated without any manual operation, go to Step 3.

  3. Collect alarm information and configuration information, and then contact technical support personnel.
  4. End.

Related Information

None

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 144666

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next