No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AM_1. hwUsedIPReachThresholdResume

AM_1. hwUsedIPReachThresholdResume


AM/4/IPPOOLUSEDOUTRESUME: OID [OID] The number of used addresses descends to alarm threshold. (PoolName=[OCTET], UsedPercentage=[OCTET])

The number of used addresses in the IP address pool fell below the alert threshold.


Alarm ID Alarm Severity Alarm Type Warning Processing error alarm


Name Meaning


Indicates the MIB object ID of the alarm.


Address pool name.


Usage percentage of allocatable IP addresses.

Impact on the System


Possible Causes

The percentage of used addresses in the IP address pool fell below the alert threshold.


  • This log message is informational, and no action is required.

Related Information


Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 151971

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next