No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FIREWALL 1.3.6.1.4.1.2011.5.25.222.1.3.3 hwFwInterzoneStatusNotification

FIREWALL 1.3.6.1.4.1.2011.5.25.222.1.3.3 hwFwInterzoneStatusNotification

Description

FW/4/FWINTERZONE:OID [oid] firewall enabled or disable action in interzone.(BasicEventIndex= [GAUGE], FWInterzoneIndex= [GAUGE], Time=[OCTET], EventType=[INTEGER], InterZoneName=[OCTET],Action=[OCTET])

The firewall function is enabled or disabled in an interzone.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.222.1.3.3 warning other(1)

Parameters

Name Meaning
OID ID of a MIB object.
BasicEventIndex Basic event index.
FWInterzoneIndex Firewall inter-zone index.
Time Time when an alarm is generated.
EventType Type of an event that triggers an alarm. When the value is 5, it is detected that the firewall function is enabled or disabled in an interzone.
InterZoneName Name of an interzone where alarms are generated.
Action Event description.

Impact on the System

None

Possible Causes

Cause 1:

The firewall function is enabled in an interzone.

Cause 2:

The firewall function is disabled in an interzone.

Procedure

  • Normal security events that occur when the firewall runs.

Related Information

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100034065

Views: 132297

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next