No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1.3.6.1.4.1.2011.6.139.18.1.1.1.10 hwStationOfflineTrap

WLAN_1.3.6.1.4.1.2011.6.139.18.1.1.1.10 hwStationOfflineTrap

Description

WLAN/4/STATION_OFFLINE_NOTIFY:OID [oid] The STA is offline. (ApMac=[OPAQUE],StaMac=[OPAQUE],StaRadioId=[INTEGER],ApName=[OCTET],StaAccessChannel=[INTEGER],StaRssi=[INTEGER],StaTrapOccurTime=[OCTET], APID=[INTEGER])

A STA goes offline.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.139.18.1.1.1.10 Warning communicationsAlarm(2)

Parameters

Name Meaning
oid Indicates the ID of the MIB object.
ApMac Indicates the MAC address of an AP.
StaMac Indicates the MAC address of a STA, which identifies the STA and functions as the index for querying information associated with the STA.
StaRadioId Indicates the radio ID of the STA.
ApName Indicates the AP name.
StaAccessChannel Indicates the access channel of the STA.
StaRssi Indicates the signal strength of the STA.
StaTrapOccurTime Indicates the occurrence time.
APID Indicates the AP ID.

Impact on the System

After the STA goes offline, all services of the STA are interrupted.

Possible Causes

1:

The STA is disconnected from the AP.

2:

The STA authentication is invalid.

3:

The STA is aged out.

Procedure

  1. No action is required.

Related Information

None.

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 151881

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next