No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.10.14 hwBrdTempResume

ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.10.14 hwBrdTempResume

Description

ENTITYTRAP/4/ENTITYBRDTEMPRESUME:OID [OID] Temperature back to normal level.(Index=[INT1], EntryPhysicalIndex=[INT2], PhysicalName="[OCTET]",EntityThresholdType=[INT3],EntityThresholdValue=[INT4],EntityThresholdCurrent=[INT5], EntityTrapFaultID=[INT6])

This alarm is generated when the temperature of the entity is reduced to the allowed range.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.219.2.10.14 Warning environmentalAlarm (6)

Parameters

Name Meaning
OID

Indicates the MIB object ID of the alarm.

Index Indicates the index of a temperature sensor.
EntryPhysicalIndex Indicates the sub-index of an entity.
PhysicalName Indicates the name of an entity.
EntityThresholdType
  • 1: rise over
  • 2: fall below
Indicates the alarm type.
EntityThresholdValue Indicates the alarm threshold.
EntityThresholdCurrent Indicates the current temperature.
EntityTrapFaultID Indicates the cause ID of the alarm.

Impact on the System

None.

Possible Causes

The temperature becomes within the range of the threshold.

Procedure

  • This alarm is a common notification and no action is required.
Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100034065

Views: 132367

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next