No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LINE_1.3.6.1.4.1.2011.5.25.207.2.1 hwVtyNumExceed

LINE_1.3.6.1.4.1.2011.5.25.207.2.1 hwVtyNumExceed

Description

LINE/4/VTYUSERREACHMAX:OID [oid] The number of login users reaches the maximum limit. (MaxUserNum=[INTEGER])

The number of login users through Telnet reaches the maximum limit.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.207.2.1 Warning equipmentAlarm(5)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

MaxUserNum

Indicates the maximum number of users who can log in.

Impact on the System

More users cannot log in to the device through Telnet.

Possible Causes

The number of Telnet connections reaches the maximum limit set by the user.

Procedure

  1. Run the display user-interface maximum-vty command to view the maximum number of VTY users. This number can be configured using the user-interface maximum-vty command.
  2. Run the display users command to check whether the number of login Telnet users exceeds the upper threshold.

    • If the number of login Telnet users exceeds the upper threshold, go to Step 2.
    • If the number of login Telnet users does not exceed the upper threshold, go to Step 3.

  3. Reduce the number of login users through Telnet.
  4. End.

Related Information

None

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100034065

Views: 151728

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next